Hands-Free Backup Nut reduces Hand Injuries

Suitable for pneumatic, hydraulic, electric torque wrenches and air Nut Runner Applications needing a BackUp Nut

Lokrite Backup will promote safe bolting, will speed up a project.

Zero Pinch points
with magnetic grip to hold in position.

Sizes

Vertical Use - magnetic hold Demo
Embeded magnets in the Lockrite Backup Nut hold the Backup Unit in place, making it Hands Free for safe single person pipe Flange bolting application.

Pneumatic Torque Wrench used is a RAD 25GX.

OPENED ENDED LOKRITE SAFETY BACKUP NUT

Standard LOKRITE SAFETY BACKUP NUT

The Opened-ended Lokrite Backup Nut ease fitting in tight spaces, where even access for a open-ended spanner is difficult.

The Lokrite open-end Backup Nut with locking bolt is a simple clever addition to your toolbox. It offers a tight radius nose, and a low height clearance for when a standard wrench wont fit and hold.

Like the standard Lokrite Backup Nut, it will hold in place by the embedded magnets in the tool, so they are always used "Hands Free".

For an area with height restrictions the locking cleat can be slid between the top of the stud or nut easily and under/beside any obstruction. Areas of restriction are inherent safety concerns even with a standard open-end wrench and the open-ended Lokrite Backup Nut address and overcome this issue.

The Lokrite Backup Nut contains magnets embedded in one side, that HOLDS any steel surface making it a true "Hands Free" device and PINCH POINT FREE application.

Simple Quick Releaseallows easy removal with a half turn bolt
- see VIDEO below

Lokrite Backup Nuts are perfect for areas that require Non-Striking & Non-Sparking torque applications. Also hold rusted nuts for difficult breakout applications too!

No hammering to get them off your flange, with less paint damage to your flange and pipe.

Lokrite Backup Wrench Lanyard with Stainless Steel Clip are available for Fall Protection.
Lanyards fits all sizes of Lokrite

Also Metric Sizes available upon request
Can be custom fabricated in any size.

The Open-Ended LOKRITE Nuts are available in the same sizes as the Chart on the left.

The difference between the two Types is the maximun Torque Capacity. The Open-Ended Type having around
2/3 the Torque Capacity of the Box Ened Type.

The Box Ended Types Torque Capacity exceeds that of the respective stud size each unit fits.

With Magnetic Hold
Truly a Hands Free - Pinch Point Free alternative to any other Wrench or Spanner!